888-2-INSUL-8

The Code Man

Top Takeaways From My MBCEA Conference Presentation:
Understanding Commercial Energy Codes Part 1

Differentiating between ASHRAE and IECC, major components of energy codes and more.

June 2, 2014

In early May I had the opportunity to present at the 45th annual Metal Building Contractors and Erectors (MBCEA) conference. My presentation focused on commercial energy codes and metal buildings, as well as the different insulation systems that help meet the energy codes. While I won’t recount my entire hour-and-a-half presentation in this blog, I would like to share some of the key information I reviewed at the conference. Read on for Part 1 of the top takeaways from my presentation, and stop by next month for Part 2.

Takeaway #1: The difference between ASHRAE and IECC.

First, ASHRAE is a standard, not a code. IECC is the code that references the ASHRAE standard. Other differences include:

Takeaway #2: What’s in a code.

There are three major components of an energy code:

 

Additionally, there are many elements within the building envelope subject to energy code regulations:

Takeaway #3: The 2009 IECC (taken from ASHRAE 2007) contains the thermal performance values of the roof and wall assemblies for metal building systems.

Finding the specific thermal performance values of roof and wall assemblies can be difficult – do you start with ASHRAE, the U.S. Department of Energy, or just resort to Google? Well, search no more. You can locate U-Factor information in the following sections of the 2009 IECC:

 

Commercial Energy Efficiency – Section 502.1.2

Commercial Energy Efficiency-Section 502.2(1)

 

Commercial Energy Efficiency – Section 502

Building Envelope Requirements - General

502.1.2 – U-Factor Alternative: “An assembly with a U-Factor equal or less than that specified in Table 502.1.2 shall be permitted as an alternative to the R-Value in Table 502.2(1)”.

Read Part 2 of my MBCEA conference presentation top takeaways. I’ll share specific information for ensuring energy code compliance, including a breakdown of the prescriptive assemblies from the 2012 IECC.

Want to make sure you don’t miss out on the latest energy code updates? Subscribe to our energy code newsletter to get blog posts sent directly to your inbox.

Subscribe now