888-2-INSUL-8

ELAMINATOR® 300

Therm-All ELAMINATORTherm-All is an official ELAMINATOR® licensee.

Safety

The patented 300 Series machines comply with OSHA fall protection standards. It offers a patented perimeter guard rail, a 14' guardrail at ridge or eave of the building, and a rear 6' extension that defines a guarded work zone for roofing.

Productivity

ELAMINATOR® improves production by allowing the insulation to be installed on days where windy conditions would normally prevent roof sheeting.

Performance

The installed system meets ASHRAE 90.1 standards with u-values obtained by a computer model, ANSYS finite element analysis validated by hot box test ASTM C 976.

ELAMINATOR® provides a High-R application for new construction without support wires or structures below. The ELAMINATOR® system reduces the compression above the purlins, because the first layer of insulation is installed between the purlins. A layer of backfill insulation is placed over the purlins to ensure complete coverage by the insulation.

Therm-All ELAMINATORAppearance

The ELAMINATOR® provides a system with facing seams lapped over the purlins where they are not exposed, which makes for a clean, seamless appearance.

ELAMINATOR® data sheet

ELAMINATOR® guide specifications

ELAMINATOR® technical safety bulletin