Insulation Doesn't Cost, It Pays
888-246-7858

Reflect-R is high quality reflective insulation perfect for a large number of applications.
Better Protection from solar heat
Reflect-R's pure aluminum facing reflects 97% of radiant heat gain.

Faster Onsite installation
The rigidity of the 3/4" core, heavy duty reinforced facing and various tab options designed for every application will save you many man hours on the jobsite.

Safer In-place fire protection
REFLECT-R's fiberglass core reduces the risk of fire spread as compared to many non-fiberglass core reflective insulations.

REFLECT-R is ASTM E84 and UL723 approved. REFLECT-R achieved a 25/50 rating which provides a Class A / Class 1 rating.
Product Standards
Widths: 72"
Lengths: 80'
Thickness: 3/4" standard 1" optional
Tabs: 2-3" staple or 1 - 6" tab standard
Tabs: Optional -1 - 6" with double stick tape
Foil Facing: 99.9% pure aluminium
Non-Foil Facing: PSK-VR optional - reduces R-value

Custom Requirements
Roof Roll Lengths: Minimum roll length is 60' Wall Roll Lengths: No custom lengths for walls

Stated R-Values
Down:Up:Horizontal:
3/4" Thick:    FGF
FGVR		 11.6
7.8		7.0
5.4		8.5
6.0
1" Thick:FGF
FGVR		11.8
8.4		 8.2
7.4		10.1
6.4

How is the R-Value determined?
The FTC (Federal Trade Commission) requires reflective insulation R-Values to be determined by using the ASTM C 1224 test. This test determines an R-Value for the entire assembly. The assembly consists of two 2"x4" wood studs 16" on center, 1/2" plywood deck on top, and the insulation installed at the mid-span of the 2"x4". The reflective airspace is critical to creating R-Value. The greater the airspace, the greater the R-Value.

How can other reflective insulation have a greater R-Value?
Some suppliers still use the ASTM C976 test, which allows them to place the insulation on the outside edge of the 2"x4", thus creating a 3-1/2" air space. In July of 2003, the FTC ruled to no longer accept the ASTM C976 test as a "fair and accurate" test in establishing R-Values.

Reflect-R Product Data Sheet (PDF)
Heat Gain
Heat is transferred through three different processes as shown above: convection, conduction and radiation. Of these three, radiation creates 93% of summer heat.
Reflect-R Results
  • Infrared waves create radiant heat.
  • The waves travel at the speed of light, in straight lines.
  • With Reflect-R insulation, 97% of these waves are deflected.
Register here for updates from Therm-All    © 2010 Therm-All